Water Heaters

Water Heater Installation and Replacement in Central Illinois

Get hot water fast with our expert water heater services in Illinois

Benefits of our water heater services

  • Free estimates for water heater replacement
  • Expert installation of ENERGY STAR® water heaters
  • Prevention of water damage from a failed water heater
  • Increased home resale value
  • Prevent standby heat loss and use less energy to heat water
A water heater system (tank style) installed in a Central Illinois home

An electric water heater doesn't have an exhaust flue at the top, and costs the most to run.

PCB Insulators expertly replaces and installs hot water heaters. 

If you are looking to replace your old water heater with an energy-efficient model, you can rest assured that by choosing the experts at PCB Insulators, you are getting the most cost-effective solution for your home. 

We proudly offer water heater work in and around Peoria, East Peoria, Morton and all neighboring areas. Contact us today for a free estimate!

Save money with our energy-efficient water heater installation

Did you know that your water heater can account for an astounding 15% of your home's total energy usage? Water heating is the second largest energy expense in a home. 

If you have an old water heater, you could be paying hundreds of dollars more than necessary annually.

By taking advantage of new water heating technologies, you can reduce your monthly utility bill and stop worrying about running out of hot water or having your old water heater spring a leak.

We are a home energy services company with the expertise to solve water heating problems in Illinois.

Call or contact us online for a free water heater inspection and estimate to discover whether replacing your water heater makes the most sense.

Replace your old, tank-type water heater before it's too late

If you have a tank-type hot water heater that's more than 10 years old, wasting energy isn't your only concern. Older tank-type water heaters corrode from the inside and eventually begin to seep water.

Beneath a solid-looking exterior, the inner wall of an older tank can be badly corroded.

If you're lucky, you'll notice a small leak in time to have a new water heater installed. If not, extensive water damage is a possibility.

When choosing a water heater, some things to consider are:

Capacity: Choose a gallon capacity to accommodate the needs of your family.

Recovery rate: Find out how fast heat is transferred to the water.

Size: Be sure that the new water heater will fit in the space that you have.

Standby loss: Ask about the percentage of heat loss per hour from stored water.

Water heater models available in IL

If you want to learn more about how different water heaters work and what your options are when replacing an old water heater, we can help. The five different types of water heaters are listed below.

Click on the type you're interested in to learn more.

diagram of a tank-type water heater in Morton, IL Tank-Type
Water Heaters
picture of a heat pump water heater installed in Atlanta, IL Heat Pump
Water Heaters

Contact us today to learn if a water heater upgrade is right for your home

Call the experts at PCB Insulators or contact us online to schedule a free water heater estimate in Peoria, East Peoria, Morton, Pekin, Washington, Bloomington, Armington, Atlanta, Beason, Benson and nearby. For a complete analysis of your home's energy performance, schedule a home energy audit. Our custom audit will tell you which home energy improvements are right for your home, including water heater replacement and more. 

 

Tank Type Water Heaters

A tank-type water heater (aka storage water heater) is the most common type of water heater used in the U.S., but not necessarily the best. Tank-type water heaters use electric resistance elements, gas or oil as the heat source. An electric tank-type water heater doesn't have a burner or flue like gas and oil versions, and cost the most to operate. In fact, you can save up to $50 a month by getting rid of an electric water heater in favor of a more efficient one.

Tank-type water heaters come in different sizes. A 60-gal. or 80-gal tank is adequate for most households. New ENERGY STAR tank-type water heaters are insulated to improve energy efficiency by reducing standby heat loss.

Even with ample insulation, efficiency is limited because when the water in the tank eventually cools to a preset temperature, it must be reheated. Standby heat loss causes this cycle to repeat 24/7, whether you're using hot water or not, and whether you're at home or away. If your water heater feels warm to the touch, it's losing more energy and costing more money than it should. When the burner shuts off, the heat in the water is released up the flue too - so exterior tank insulation can't fix the problem of the water cooling again, requiring constant reheating. Interested in saving energy costs by eliminating standby heat loss? Then you may want to have a demand water heater installed.

tank style water heater in Pekin, IL

Heat Pump Water Heaters

A heat pump water heater also qualifies as a tank-type water heater, but it works in a different way. Instead of utilizing gas, oil or electric resistance as a heat source, this appliance gets its heat from a small air-source heat pump located on the top of the tank.

Like other heat pumps, this one uses a refrigerant to extract heat from the surrounding air and move it to a heat exchanger, where water heating takes place. If necessary, regular electric resistance heating elements in the tank can provide backup heating. A heat pump water heater is about twice as efficient as a standard electric water heater.

However, it will cool the space where it's installed, so it may not be suitable for use in cold climates where basements and utility rooms need to be kept reasonably warm.

Looking for a price? Get a no cost, no obligation free estimate.

our service area

We serve the following areas

  • Armington
  • Atlanta
  • Beason
  • Benson
  • Bloomington
  • Carlock
  • Chillicothe
  • Congerville
  • Creve Coeur
  • Danvers
  • Deer Creek
  • Delavan
  • East Peoria
  • Edelstein
  • El Paso
  • Emden
  • Eureka
  • Goodfield
  • Green Valley
  • Gridley
  • Groveland
  • Hartsburg
  • Heyworth
  • Hopedale
  • Hudson
  • Lawndale
  • Lincoln
  • Lowpoint
  • Mackinaw
  • Mc Lean
  • Metamora
  • Minier
  • Minonk
  • Morton
  • Mossville
  • New Holland
  • Normal
  • Pekin
  • Peoria
  • Peoria Heights
  • Roanoke
  • San Jose
  • Secor
  • Shirley
  • South Pekin
  • Stanford
  • Towanda
  • Tremont
  • Washburn
  • Washington
Our Locations:

PCB Insulators
2600 SW Washington St
Peoria, IL 61602
1-309-233-3399